| SR.NO. | DIESEL ENGINE BODY NUMBER | TYPE & MARK | RATED OUTPUT HP (KW) | RATED SPEED (RPM) | NO. 0F CYCLE | BORE X STROKE (MM) | CUBIC CAP (CC) | SPECIFIC FUEL CONSUMPTION LOAD (SFC) | WEIGHT | ||
| 1 | KS-6 | IDI, TRB, CIP, CIG | 6 (4.4) | 650 | 1 | 114.3X137.9 | 2133 | G/KWH | G/bhph | NETT (KGS) | GROSS (KGS) |
| 2 | KSB-6 | IDI, BB, LOP, CIP, CIG | 6 (4.4) | 650 | 1 | 114.3X137.9 | 2133 | 268 | 197 | 310 | 420 |
| 3 | KS-8 | IDI, TRB, CIP, CIG | 8 (5.9) | 850 | 1 | 114.3X137.9 | 2133 | 268 | 197 | 320 | 430 |
| 3 | KSB-8 | IDI, BB, LOP, CIP, CIG | 8 (5.9) | 850 | 1 | 114.3X137.9 | 2133 | 268 | 197 | 320 | 430 |
| 268 | 197 | 330 | 440 | ||||||||
| IDI | In direct injection | ✅ |
| BB | Bush bearing | ✅ |
| LOP | Lubricating oil pump | ✅ |
| TRB | Taper roller bearing (no.32211) | ✅ |
| CIG | Cast iron camshaft gear & idler gear | ✅ |
| CIP | Cast iron piston | ✅ |
* Bush Bearing Diesel Engines Are Also Available On Demand
- Compression ratio = (IDI) 18:1
- Flywheel weight (each) = 66(+_1) kgs
- Fuel tank capacity = 13.5 liters
- Recommended fuel oil = diesel as per IS : 1460 H.S.D
- 20 feet container loadability = 36pcs
- Lubricating oil sump capacity = 4.5L – maximum (minimum – 3L to be maintained)
- Lubricating oil consumption = 1% of fuel consumption (maximum)
- Running through cooling water at 40c ambient temperature = 60L. / bhph (minimum)
- Recommended lubricating oil = temperature rangewise
| OL | Overall length | ✅ |
| CS | Crankshaft dia. | ✅ |
| CH | Centre hight | ✅ |
| OB | Overall breadth | ✅ |
| FW | Flywheel dia. | ✅ |
| FB | Foundation breadth | ✅ |
| OH | Overall height | ✅ |
| FL | Foundation lenght | ✅ |
NOTE => FOUNDATION BED SHOULD ALWAYS BE STRONG , FLAT & LEVELLED
APPLICATIONS :: pumpset , genset , multi-crop threshers , chaff cutters , maize & rice hullers mini rise plants sugarcane , crushers , corn grinding mills , cement concrete mixer , construction hoist , mining , borewell air-pumps & air compressor etc.
Inquiry - Peter Diesel Engine 6.50HP